Home / Vacuums / How To Clean a Bagless Vacuum Cleaner? – A Step-by-Step Guide

How To Clean a Bagless Vacuum Cleaner? – A Step-by-Step Guide

by  Lawrence -  Last updated on March 3, 2022

Disclosure: This post may contain affiliate links. This means that at no cost to you, we may earn a small commission for qualifying purchases.

The problem with bagless vacuums is that they get dirty very easily. You have to clean them out every so often, or else it can affect your suction power negatively.

When this happens, you might be tempted to buy a new one because it’s easier than attempting to clean yours. But cleaning a bagless vacuum may be easier than you think.

To clean a bagless vacuum, you will need to clean the filter first. Over time, a lot of dust can build upon it and reduce its suction power, so clean this out every month or two. Additionally, you’ll need to wipe down the interior of the vacuum with soap and water.

In this article, we will go through the steps you should follow to clean this particular part of your vacuum cleaner. Additionally, we will answer some of the commonly asked questions surrounding how to clean a bagless vacuum.

How Do I Clean A Bagless Vacuum?

1. First, open up the filter chamber and remove any debris built up on it using a brush or some scraping device

2. Next, clean out the inside of this area with water because dust can accumulate there too— this should be clean at all times to maximize efficiency when cleaning

3. Dry off both areas before placing them back together— this stops moisture getting into places where it shouldn’t go, which could cause damage if left unchecked

4. After taking apart your bagless vacuum, wipe down any other surfaces such as around wheels and vents— this ensures they are clean for better suction and cleanliness

What Supplies Do I Need to Clean a Bagless Vacuum?

To clean your bagless vacuum, you’ll need:

  • Clean water
  • Clean cloths (two minimum)
  • A screwdriver or similar tool for removing screws if necessary

You might not need a screwdriver and screws depending on the type of bagless vacuum cleaner you own. For example, Dyson vacuums are designed so that it’s easy to clean them without requiring tools and all bags in its lineup are self-cleaning too!

If your bagless vacuum is not as user-friendly, however, such as with Bissell models, there may be some cases where you will require a screwdriver.

Many of these vacuums do require quite an extensive cleaning at times, which can mean taking out certain parts of the device carefully using a flathead screwdriver. Before doing anything drastic, though, clean all filters and then clean the dust bin.

Related Questions

Here are a few common questions related to the process of cleaning a bagless vacuum and the supplies used to do so.

How Do You Empty a Bagless Vacuum Cleaner?

You can clean a bagless vacuum cleaner by removing any filters and then cleaning the dust bin. Be sure never to use too much pressure when cleaning as it will cause damage over time.

Before doing anything else, make sure that all filters are cleaned out first since they require quite extensive maintenance at times. Once you’ve done that successfully, try taking apart your device carefully with a flathead screwdriver to get rid of stuck particles like dirt or grease, which is difficult to remove otherwise.

Do not use harsh chemicals such as bleach or degreasing spray since this will damage specific vacuum cleaner components when used too much. It is best to avoid using these products entirely to prevent damaging sensitive parts over time, requiring costly repairs if ignored.

How Do You Clean a Smelly Bagless Vacuum?

If your bagless vacuum has developed an odor, clean it regularly to eliminate stuck particles like dirt or grease, which is difficult to remove otherwise.

It’s also important that users only add detergent and water into their machine and nothing else since other substances could cause buildup on filters which would be difficult to remove otherwise.

Doing so will ensure that no additional unnecessary damages are done by adding anything extra than initially intended. If none of these steps fixed the issue, consider taking apart everything until you find the source of contamination.

Wearing protective gloves is essential when cleaning the interior of your vacuum. When all parts have been removed, wipe them down with soap and water, and let them fully dry before reassembling.

If the clean-up is not enough to resolve the issue, it may be time for a new vacuum. Vacuums are costly and should only be replaced when there’s no other alternative option available. Replacing them every few years is recommended but can vary depending on how often they’re used.

Can You Clean the Inside of a Vacuum With Water?

You can clean the inside of a vacuum with water. This is only recommended for bagless vacuums. If you clean your vacuum with water, make sure that you remove all the parts first and let them dry before reassembling them to prevent mildew or mold from occurring.

Wipe clean with a clean, damp cloth or sponge and let them dry completely before reassembling the vacuum to prevent mildew or mold from occurring. Replacing them every few years is recommended but can vary depending on how often they’re used or whether you have pets in your home that shed.


To keep your vacuum running at its best, you’ll need to clean the dust filter. If it’s been a while since you’ve done this, the chances are that there is quite a lot of dust built up on the filter, which can reduce your vacuum’s suction power.

A good rule of thumb is to do this every month or two. This can depend on how often you use your vacuum cleaner and how much dirt gets stuck in it each time. More regular cleaning may be necessary for homes with pets.

Cleaning the filter is just one of many steps you should take to keep your vacuum in excellent condition. You will also need to ensure that all parts are properly lubricated and regularly clean out any debris or hair wrapped around the brush roll, leading to clogs.

Comments are closed.